What I do is brush on a coat of dirt colored paint, and while the paint is still wet I add weathering powders. First a light rust colored powder and then some darker rust. I apply it generously which creates a texture which in my eyes looks quite realistic.
Showing posts with label dirt. Show all posts
Showing posts with label dirt. Show all posts
Saturday, December 5, 2015
Weathering Track, part 1
Progress is actually made on the layout, although you might think otherwise. What I am doing is weathering the track. I have started with the back of the rails, i.e. the side facing the backdrop. Pointless some might say, but I do not agree. An occasional future picture might be taken in an angle revealing that side of the rails. And also, I just feel happier knowing the weathering is complete. But to be on the safe side I do the back first, which will later give me no choice but doing the other side (the front) also :-)
Saturday, January 19, 2013
Ballasting continues
With the mainline ballasted in a traditional way, displaying a relatively well manicured right of way, it was time to the turn the attention to the yard and drill tracks. Here I wanted a more unkempt look, with dirt rather than rock ballast. So I decided to give tile grout a try.
I did some tests and decided to go with a mix of 50% grout and 50% N scale ballast. To use only grout, which is much like a fine powder, was more or less impossible. It gave you nearly no control, and the stuff ended up everywhere. A mix of ballast and grout was easier to control, but still gave a dirt look. Here is a picture of a spur ballasted withe the grout and ballast mix (the middle track). The mix is kept in place with a water and white glue mix.
I did some tests and decided to go with a mix of 50% grout and 50% N scale ballast. To use only grout, which is much like a fine powder, was more or less impossible. It gave you nearly no control, and the stuff ended up everywhere. A mix of ballast and grout was easier to control, but still gave a dirt look. Here is a picture of a spur ballasted withe the grout and ballast mix (the middle track). The mix is kept in place with a water and white glue mix.
Once the glue had dried I applied weathering powders to obtain a dirt look. I also used some rust powder along the rails, and some black powder in between the rails, simulating oil and whatnot. I gave the mainline a light rust and oil treatment as well.
And a close up...
The dirt is a little to brown maybe. I'll aim for a slightly more gray tone when I do the next stretch of track.
Subscribe to:
Posts (Atom)



