Sunday, May 15, 2016

A wire fence

More fencing, this time a wire fence built from two sizes piano wire and some metal mesh. The first picture shows how I laid out the piano wire posts and top rails on a piece of wood, held in place with tape.



Next I soldered the posts and rails together. I also added a few brace posts.



After having cut a suitable piece of wire mesh, diagonally from a larger piece, I attached the mesh. That turned out to be easier said than done. The mesh was painstakingly "unruly" and had its own ideas on how to behave. And sitting tight was not one of them.

My initial idea was to glue (CA) the mesh to the supporting structure, but I gave that up and instead soldered it in place. The next two pictures show the fence after having been sprayed with a grey primer.




In the last picture the mesh shows traces of me wrestling with it. Those parts will hopefully be disguised by weeds and stuff. Some weathering and rusting is also to come.

No comments:

Post a Comment